Espresso Machine Support & Troubleshooting | Love Espresso

Support & Troubleshooting
Support

Support & troubleshooting

Most espresso problems come down to grind, dose, cleaning or scale. Work through the common fixes below before you book a repair. Always switch off and unplug your machine and let it cool before cleaning or inspecting it.

Common espresso machine problems

Shots run too slowly or only drip
  • Grind slightly coarser. This is the most common cause.
  • Check your dose. Too much coffee in the basket restricts flow.
  • Tamp level and firm, but you don't need to lean your full weight on it.
  • Clean the shower screen and basket. Built-up coffee oils block flow.
  • If it has crept up gradually, the machine may need descaling.
Shots run too fast and taste weak or sour
  • Grind finer, a small step at a time.
  • Increase your dose slightly and make sure the bed is evenly distributed before tamping.
  • Use fresh beans. Coffee more than about a month past its roast date extracts quickly and tastes flat.
Water leaks from around the group head

This is usually a worn or hardened group head gasket, or coffee grounds on its edge. Wipe the gasket and basket rim after every shot. Gaskets wear out with use and should be replaced roughly once a year on a home machine, more often in a café. You'll find replacement gaskets and shower screens in our Parts & Care range.

Weak or no steam from the steam wand
  • Purge the wand before and after every use, and wipe off milk straight away.
  • Unscrew the tip and clear the holes with a pin or the cleaning tool supplied.
  • Give the boiler time to reach full steam temperature.
  • Persistent low steam can be a sign of scale build-up.
Machine won't turn on or heat up
  • Check the plug, socket and fuse, and that the water tank is seated properly with enough water in it.
  • Many machines won't heat with an empty or misaligned tank.
  • If it still won't power up, stop and contact us or the manufacturer. Don't open the casing yourself.
Coffee isn't hot enough
  • Let the machine warm up fully, typically 15 to 30 minutes for a heavier machine.
  • Warm your cups and lock the portafilter in while the machine heats.
  • Run a blank shot through the group before brewing.

Grinder problems

Grind is inconsistent or clumpy

Clean the burrs and chute with a grinder brush, or use grinder cleaning tablets. Oily beans clog grinders faster. If the grind is still uneven, the burrs may be worn and due for replacement.

Grinder is noisy or has stopped

Switch off and unplug it immediately. A stone or foreign object in the beans can jam the burrs. Empty the hopper and check for blockages. If it still won't run, contact us.

Keep it running: a simple care routine

Every shot

Purge the group head, wipe the gasket and basket rim, and purge and wipe the steam wand.

Weekly

Backflush with a blind basket and cleaning detergent (if your machine supports it), and soak the baskets and portafilter.

Every 1 to 3 months

Descale according to your water hardness and the manufacturer's guidance, and check your water filter.

Shop cleaning products, descaler and spare parts. Always follow your machine's manual. Some machines must not be backflushed, and descaling a dual boiler machine incorrectly can damage it.

Still not working?

Send us your machine's make and model, what's happening, and your order number if you bought it from us. We'll help you work out the next step, whether that's a part, a warranty claim or a repair.

Contact support